Let's Party Shaker Card - Heffy Doodle

Hello Crafty Friends, 

I am excited to return today with another guest post for Heffy Doodle. Today's card is the perfect card for any celebration. 

CARD RECIPE

• Prep a piece of A2-sized Bristol paper using anti-static powder.
•  Stamp out the boxes of presents from the Wrapped With Love Stamps using watermark ink.
• Heat emboss the stamped panel using clear embossing powder.
• Ink blend the panel. I used 3 inks to create a rainbow blend.

• Die-cut the panel using the Scalloped Imperial Frames Dies.
• Glue the center of the background onto the card base.
• Add acetate to the scalloped Frame and foam tape along the edge of the frame.
• Add the shaker bits to the center of the card front.
• Remove the protective layer from the foam and line up the scallop frame with the background to close the shaker layer.
• Die cut the Let's Party Jumbo Sentiment Dies. For the letters, I used black card stock and for the background layer, I used vellum.
• Finish by adding some clay stars onto the die-cut stars.

How fun is this card!? I love that it is a party in itself. Shakers are my all-time favorite kind of card to gift simply for that reason.

Thank you for stopping by and until next time... Happy Crafting!

Ilda👋

SUPPLIES

Wrapped With Love Stamps Shop at: SB | HD	Let's Party Jumbo Sentiment Dies Shop at: SB | HD	Scalloped Imperial Frames Dies Shop at: HD	Bristol Paper Shop at: SSS | AMZ
Magic Powder Bag Shop at: SSS	VersaMark Watermark Stamp Pad Shop at: SSS | AMZ	CRYSTAL CLEAR Emb Pwd Shop at: SSS | HD	Background Blender Brushes Shop at: SSS | HBS
Atelier Ink Bee Sting Yellow Shop at: IO3	Atelier Ink Sweet Petunia Shop at: IO3	Atelier Ink Peacock Blue Shop at: IO3	Acetate Card Panels Shop at: SSS | SB | HA
Foam Tape 1/2 inch Shop at: AMZ	Assorted Moonshine Sequins Shop at: SSS	Sequin Mix Plus - Birthday Candles Shop at: PFS

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Enjoyed this post? Never miss out on future posts by Following this Blog

Shaker Pocket Tips and Tricks - Ice Cream Sundae Shaker | Honey Bee Stamps

Happy Monday crafty friends!

Today's post is all about sharing my TIPs and TRICKs for creating the perfect shaker using a Shaker Pockets. If you have played with them before, you may already know not all shaker pockets are made the same way, as they are all manufactured differently for various companies. Even though the original idea for these pockets was mine, I had no part in manufacturing them, but I have perfected ways to make them all work. 

This yummy Ice Cream Sundae Shaker is very straightforward to make so I will skip the how-to's today and focus on the tips and tricks.

SHAKER TIPS & TRICKS when using Shaker Pockets

• TRY NOT to remove the protective film until it is glued to the card base, this will prevent scratches and keep the front clean. If you do remove it, place it lightly onto the front until you need to glue or add elements to it.
• USE and bone folder to crease the tabs down as flat as possible.
• TRIM insert/background panel 1/8th inch from the top and the side (2 sides only)
• DO NOT overfill the pocket with shaker pieces. I fill about 1 inch height from the bottom.
• USE strong adhesive to secure the finished pocket to the card base. Recommend Redline tape.
• PLACE tape along the entire perimeter of the pocket, as close to the edge of the tab as possible. Include at least one piece down the middle, more for larger pockets.
• When attaching the card base to the Shaker Pocket, ALIGN the bottom edges with each other before pressing them together. This ensures perfect alignment of all components. Ensure the card base is the same size before attaching them together.
• USE strong adhesive to attach elements to the front of the acetate. If using liquid glue, place a weight on top and allow for drying time.
• IF there is glue smudging or accidents, USE a baby wipe to wipe off excess glue and gently wipe it with a clean microfiber dry cloth to remove streaks while still wet. 
• IF mailing the shaker, AVOID adding extra bulk to the front of the panel. Instead, stamp on the background panel and add die-cut pieces to the inside of the pocket or directly onto the acetate without using extra foam or dimension.
• AVOID using small glitter and microelements with these shaker pockets. These shaker pockets have tiny openings at each corner to allow for air compression. Using small glitter or microelements may result in them escaping through these openings, potentially causing a mess and reducing the effectiveness of the shaker pocket.

PHOTOGRAPHY TIPs

• I take my photos in natural light, in front of large windows. It is difficult to take pictures of these reflective cards when sunny and there is direct light as you will end up with glare on the reflective surfaces. I will wait until the sun is not shining directly into the window or when it is cloudy. 
• If I can't wait, I have also used tissue paper on the window to diffuse the light when it is too sunny. 
• Use foam boards to block the reflections that you may see when looking through the camera lens. 

Check out another fun way to photograph your cards. Display them using the new Ornate Card Stand 😍

I used coordinating papers and double-sided it to make it sturdier. Fold the stand and tuck it into your card for the recipient to display. 

I hope you will save this post and refer to it the next time you create a shaker card using these pockets, especially if you haven't had the best results in the past. Make sure to watch my latest Reel to see how I use all these tips and tricks to create this yummy card.

Thank you for stopping by and until next time... Happy Crafting!

Ilda 🍨

SUPPLIES

Bee Creative A2 Shaker Pockets Shop at: HBS	Let's Party Paper Pad Shop at: SSS | SB | HBS	3D Rosette Die Shop at: SSS | SB | HBS	Lovely Layers: Cupcakes & More Shop at: SSS | SB | HBS
You're So Extra Shop at: SSS | SB | HBS	You're So Extra - Honey Cuts Shop at: SSS | SB | HBS	Ornate Card Stand - Honey Cuts Shop at: SSS | SB | HBS	Golden Afternoon - Sequin Mix Shop at: HBS
Sticky Red Tape 1/4" Shop at: HBS	Bee Creative Glue Shop at: SSS | SB | HBS	Bee Shimmery Liquid Shop at: SSS | SB | HBS	Honey Bee Reverse Tweezers Shop at: HBS
Bee Creative Bitty Buzz Cutter Shop at: HBS	Platinum 6 Die Cutting Platform Shop at: SSS | SB | HBS	New Mini Misti Shop at: SSS | SB | HBS	Glossy Accents Shop at: SSS | AMZ | SB | HBS

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Enjoyed this post? Never miss out on future posts by Following this Blog

Big Birthday Celebration Shaker Card | Honey Bee Stamps

Hello friends and Happy Friday!

Today's BIG Birthday Celebration Shaker Card is part of the Honey Bee Stamps Celebration Release Instagram Hop. This type of Shaker card holds a special place in my heart as they are not only fun to create but also brings immense joy when gifted, especially for celebrations. They embody the spirit of festivity all on their own! Who can resist the urge to give them a shake? Certainly not me! 

Plus, I'm filled with gratitude and excitement knowing that Honey Bee Stamps has brought to life these pockets, inspired by an idea I shared with the card-making community years ago! Explore the origins of the shaker pocket concept by clicking HERE.

"Look Mom I'm famous", lol!

 There's my card and my name on the packaging! 

CARD RECIPE

  

SHAKER POCKET

• Start with one Bee Creative A7 Shaker Pocket. TIP: for best results, bend the flaps, use a bone folder, and press down the edges to make it as flat as possible. TIP: DO NOT remove the protective layer before doing this step as it will scratch the acetate!
• Trim the background to fit inside the shaker panel. I used a paper from the new Let's Party Paper Pad. TIP: Trim the panel slightly smaller than the Shaker pocket front. I trimmed 1/8th inch off of the top and the side of this 5x7 panel.
• Create the shaker pocket by gluing 3 of the 4 tabs down. 
• Pour your shaker elements into the pocket. I used BOKEH LIGHTS Confetti and some coordinating clay circles that I found in my stash.
• Glue down the last tab to close up the Shaker Pocket.
• Peel off the protective layer. TIP: I like to just remove the layer over the tabs, while leaving the front still mostly covered with the protective layer. This will prevent any scratches or fingerprints until I am ready to add my die cuts to the front of it.
• Attach the finished pocket to the card base. TIP: for best results make sure the tape you use is strong as the acetate will try to pop up if not glued down well. I use Sticky Red Tape 1/4" and apply it as close to the edge as possible.

CARD FRONT

• Die cut and assemble the Lovely Layers: Party Hat - Honey Cuts, the Lovely Layers: Party Blower - Honey Cuts, and the Sundae from the Lovely Layers: Sweets - Honey Cuts. I used coordinating papers from the Let's Party Paper Pad to ensure a seamless and cohesive look. 
• If you still haven't removed the rest of the protective film from the front, remove it now. 
• Glue the pieces onto the acetate card front. I used Bee Creative Glue.
• To embellish the die-cut pieces, I used Let's Party Gem Stickers and glossy accents on a few elements.

SENTIMENT

• For the sentiment, I wanted to use black glitter card stock but could not find it so decided to try something else. I used the Big Birthday - Honey Cuts, I die-cut the top layer using black card stock and then rubbed Bee Creative Watermark Ink, and then used WOW Embossing Glitter BLACK GLINT to heat set it. It is difficult to see the glitter in the photo but there is lots of shine IRL.
• Add tiny glue dots to the back of the die-cut, I like to use liquid glue to allow for wiggle room, plus if there is some smudging it will dry clear. TIP: If there is lots of glue smugging or accidents, use a baby wipe to wipe off excess glue. While the area is still wet, gently wipe it with a clean microfiber dry cloth. This will take care of any streaks.
• BONUS TIP: Place a stamp block over the sentiment and allow it to dry, this will ensure the die cut is flat and allow for good adhesion to the the acetate.

Wow, not only is this the biggest shaker card I have made, but also the most ever TIPS I have shared in making one on a blog post.

Make sure you join us over on Instagram and hop along for a chance at winning $50 GC to shop the release! Click HERE to join the Hop!

I hope you like this Big Birthday Celebration Shaker Card. And if you have had any issues making these in the past you can try some of my tips to see if they help. Thank you for stopping by and until next time... Happy Crafting!

Ilda 💖🎂

SUPPLIES

Bee Creative A7 Shaker Pockets Shop at: HBS	Let's Party Paper Pad Shop at: SSS | HBS	Lovely Layers: Party Hat - Honey Cuts Shop at: SSS | HBS	Lovely Layers: Party Blower - Honey Cuts Shop at: SSS | HBS
Lovely Layers: Sweets - Honey Cuts Shop at: SSS | HBS	Big Birthday - Honey Cuts Shop at: SSS | HBS	Let's Party Gem Stickers Shop at: SSS | HBS	BOKEH LIGHTS Confetti Shop at: HBS
Sticky Red Tape 1/4" Shop at: HBS	Bee Creative Glue Shop at: SSS | SB | HBS	Bee Creative Bitty Buzz Cutter Shop at: HBS	Bee Creative Watermark Ink Shop at: HBS
WOW Embossing Glitter BLACK GLINT Shop at: HBS	Glitter Paper Basics Shop at: SB | HA	Glossy Accents Shop at: SSS | AMZ | SB | HBS

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Enjoyed this post? Never miss out on future posts by Following this Blog

Celebrating Pride: Trio of Joyful Cards for Special Occasions | Honey Bee Stamps

Just imagine if the rings of a tree were actually rainbow-colored, how beautiful and colorful this world would be! Then again, trees would be even more endangered than they already are because we would all be chopping them down😆

Inclusive celebrations are always worth cherishing, and what better way to express your love and support than through heartfelt cards? Today I bring you a delightful trio of pride-inspired cards to commemorate a birthday, anniversary, and the arrival of a precious little one. These cards not only celebrate milestones but also promote a message of inclusivity, love, and acceptance.

CARD RECIPE

I will explain how I made one of these cards as the rest were done similarly. 

Using the Lovely Layers Slice and Stump Die, cut out your tree rounds. For a touch of pride, color the tree rings with vibrant rainbow hues using KARIN BRUSHMARKER PRO markers. To make the rings pop even more I used a distress brayer and rolled black ink over each die and then carefully placed the painted stumps back into their mold to press the black line impressions back into the stumps. This adds depth and dimension to them. I then glued them to a black bark layer. The leaves I used come from the  Lovely Layers: Dogwood Dies adding a cheerful element to the card. 

To complete this card I added a sentiment from the Inside Snarky Birthday Sentiment Stamp set stamped and heat embossed in white, then die cut with the coordinating die. This whimsical heart comes from the Heart Hug Die set, topped with a sparkly gem from the Aurora Borealis Gem Stickers. The background for each of these cards, (although it is difficult to see from these pictures) is full of texture that comes from using the Woodgrain 3D embossing folder.

For the Anniversary card of the Trio, I used two of the stumps and made them look like a little couple. This time my sentiment for the card came from the Mini Messages Stamps and Dies.

For comparison, I initially tried outlining the rings with a fine-tip black pen which was a bit time-consuming but the results are definitely darker. But using the brayer was super easy especially when making multiples.

This final card is for a family, welcoming their little one. Here again, the sentiment comes from the Mini Messages Stamps and Dies.

Even though these are just colorful stumps, I think turned out to be so sweet.

Whether you are here because you love rainbows or pride, I hope this trio of cards inspired you today. 

Thank you for stopping by and until next time... Happy Crafting!

Ilda 🌈💕

SUPPLIES

Lovely Layers Slice and Stump Die Shop at: SSS | SB | HBS	Woodgrain 3D embossing folder Shop at: SSS | SB | HBS	Mini Messages Stamps Shop at: SSS | SB | HBS	Mini Messages Dies Shop at: SSS | SB | HBS
Lovely Layers: Dogwood Dies Shop at: SSS | SB | HBS	Heart Hugs Dies Shop at: SSS | SB | HBS	INSIDE SNARKY BIRTHDAY SENTIMENTS Shop at: SSS | SB | HBS	Inside: Snarky Birthday Sentiments Dies Shop at: SSS | SB | HBS
Intense Black Ink Pad Shop at: SSS | SB | HBS	Bee Creative Brilliant White Pigment Ink Shop at: SSS | SB | HBS	Aurora Borealis Gem Stickers Shop at: SSS | HBS	Honey Bee Reverse Tweezers Shop at: SSS | HBS
Stamping Pressure Tool Shop at: HBS	Bee Creative Glue Shop at: SSS | SB | HBS	Platinum 6 Die Cutting Platform Shop at: SSS | SB | SB	Canson XL WATERCOLOR PAPER Shop at: SSS | AMZ
New Mini Misti Shop at: SSS | SB | HBS	Distress Brayer Shop at: SSS | SB | HBS	Arctic White Emb.Pwd. Shop at: SSS | IO3

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Enjoyed this post? Never miss out on future posts by Following this Blog