Recessed Embossing Folder Background Cards - Honey Bee Stamps

***Please note links in the post are no longer active, if you are looking for something specific use this link here to 👉 HONEY BEE STAMPS and search for the product listed. My apologies for the inconvenience ***

Hello friends, 

Today I have a few cards inspired by a couple of my Instagram friends, Enna @ritzyhag and Cindy @crncards If you like my cards today, you will definitely love the inspiration from these two very talented artists!

As you may already know embossing folders have a positive or raised side and a negative or recessed side. I will use the negative or recessed side of the paper for both cards.

CARD RECIPE

• Place a piece of watercolor cardstock in between the Spring Medley 3D Embossing Folder. I used Canson watercolor paper and gave it a light mist before running it through an embossing/die-cutting machine.
• Add ink to the recessed side of the embossed design. I used small ink-blending shader brushes and distress oxide inks. 
• Spray the entire panel with water and allow the inks to mix.
• To add sparkle to the background, I added some drops of Bee Creative Liquid Shimmer.
• Allow the panel to completely dry before the next step.

• While the panel is drying, stamp out the sentiments for the card front. The sentiments I used come from the Mini Messages Stamps. Stamp the sentiments using Bee Creative Brilliant White Pigment Ink and heat set the ink with white embossing powder.
• Die-cut the strips using Mini Messages Dies.

• Once the embossed panels are completely dry, use the Bee Creative Intense Black Ink Pad and rub the black ink all over the colored recessed side of the panel.
• Trim the panel down and black ink to the trimmed edges.
• Glue a black panel to a card base. I left a little white edge around the perimeter of the card.
• Add foam to the back of the embossed panel and glue it to the card front.
• Glue the sentiments in place using some foam strips.
• Finish by adding some gems in the centers of the flowers.

This next card was done the exact same way as the first one only this time I used the Clover Petals 3D Embossing Folder.

 Also, I did not add any Bee Creative Liquid Shimmer and used the Marvelous Moments Gem Stickers.

I love how simple this detailed background was to make. It looks like so much work but it actually came together fairly quickly. The part that took the longest was the drying time of the panels.

Hope you enjoyed these colorful background panels using Embossing Folders. Hopefully, they inspire you to give this technique a try. Remember you can use any water-reactive media to add color to your background. Just have fun!

Thank you for stopping by and until next time... Happy Crafting!

Ilda 🍀

SUPPLIES

Spring Medley 3D Embossing Folder Shop at: SSS | SB | HBS	Clover Petals 3D Emb. Folder Shop at: SSS | SB | HBS	Mini Messages Stamps Shop at: SSS | SB | HBS	Mini Messages Dies Shop at: SSS | SB | HBS
Happy Hearts Gem Stickers Shop at: SSS | SB | HBS	Marvelous Moments Gem Stickers Shop at: HBS	Bee Creative Intense Black Ink Pad Shop at: SSS | SB | HBS	Bee Creative Brilliant White Pigment Ink Shop at: SSS | SB | HBS
Bee Shimmery Liquid Shop at: SSS | SB | HBS	Bee Creative Bitty Buzz Cutter Shop at: HBS	Stamping Pressure Tool Shop at: HBS	Bee Creative Glue Shop at: SSS | SB | HBS
Canson XL WATERCOLOR PAPER Shop at: SSS | AMZ	Shader Brush 1+ - 5/pk Shop at: SSS | HBS | WF	MUSTARD SEED DISTRESS OXIDE Shop at: SSS | SB | HBS	Oxide Ink Pad PICKED RASPBERRY Shop at: SSS | SB | HBS
Mermaid Lagoon Oxide Ink Shop at: SSS | AMZ | SB | HBS	Mowed Lawn Oxide Ink Shop at: SSS | SB | HBS	Platinum 6 Die Cutting Platform Shop at: SSS | SB | SB	New Mini Misti Shop at: SSS | SB | HBS
Arctic White Emb.Pwd. Shop at: SSS | IO3	Distress Sprayer Ranger Shop at: SSS | SB | HBS

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Enjoyed this post? Never miss out on future posts by Following this Blog

Watch the magic happen 👇

View this post on Instagram

A post shared by Ilda / Card Making / Paper Crafts (@ilovedoingallthingscrafty)

Blooming Wildflowers March Release | Picket Fence Studios

Hello friends and happy Thursday.

Today I am taking part in the Blooming Wildflowers March Release Instagram Hop for Picket Fence Studios and of course, you are all invited to join in on the festivities as there is a $50 prize for grabs! To join in click 👉HERE.

CARD RECIPE

My card features the Brighter Days Gerbera Daisy and coordinating Dies. I stamped out the image using Black Hybrid Ink Pad and then colored it in using Copic Markers. I added white gel pen details for highlights and to the center, I added some sparkle using a glue pen and some sparkle glitter. The sentiment also comes from the Brighter Days Gerbera Daisy.

For the background, I applied Bee Sting Glaze to the Center Polka Dot Stencil. To finish I added a few of the iridescent drops from the Glamorous Embellishments Jar. I love how this cheerful card turned out😍

I hope you have been inspired by this Gerbera Bloom today. If you want to see more inspiration from the Blooming Wildflowers Release make sure to check out today's Instagram Hop.

Thank you for stopping by and until next time... Happy Crafting!

Ilda🎕

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Enjoyed this post? Never miss out on future posts by Following this Blog

DIY Four Leaf Clover Card | Honey Bee Stamps

***Please note links in the post are no longer active, if you are looking for something specific use this link here to 👉 HONEY BEE STAMPS and search for the product listed. My apologies for the inconvenience ***

Happy March, everyone!

With St. Patrick's Day just around the corner, I felt inspired to create a four-leaf clover card using Honey Bee Stamp supplies. Crafting it from scratch is always a joy for me, as I get to explore new ways to use my supplies creatively and develop unique designs. Although I had a few moments of doubt during the process, I'm pleased with the end result. Let me walk you through the process.

CARD RECIPE

Pattern papers - Giddy for Gingham Paper Pad, Gingham Happy Hearts Paper Pad

Glitter Paper - Recollections Spring Glitter Paper Pad

Frames, Heart Dies - Lace Heart Layering Frames Dies

Rainbow Dies - Sweet Stacks Ovals

Sentiment - Mini Messages Stamps

Ink - Bee Creative Brilliant White Pigment Ink

Banner - Mini Messages Dies

Gem - Simply Spring Gem Stickers 

Creating the Rainbow:

To form the rainbow, I began by die-cutting the largest oval from the Sweet Stacks Ovals set. Then, I used progressively smaller oval dies to cut the previous die cuts, layering them to create the rainbow effect. After aligning the thin rainbow cuts and securing them together, I sliced them into smaller pieces. These pieces were then arranged onto the pattern paper layer frame, ensuring the ends met in the center behind the clover.

Crafting the Clover:

For the clover, I cut out four medium scalloped hearts from the Lace Heart Layering Frames Dies, scored them down the center, and glued only the left side of each heart. This technique gave the clover dimension while still allowing it to fold flat inside an envelope. I initially hadn't planned on adding the pattern paper heart layer, but in the end, I am glad I did because I had to cover up the mess I had made underneath. I tried adding white gel pen details and I also tried some ink blending to give the plain green petals life, but it looked so terrible. Although I encountered some challenges with the design, adding the pattern paper heart layer helped enhance the overall look.

Finishing Touches:

To complete the card, I stamped out the sentiment using Bee Creative Brilliant White Pigment Ink, then heat set it with white embossing powder. I then used a banner die from the Mini Messages Dies to cut out the sentiment and then glued it in place. For one final touch of sparkle, I added a green gem to the center of the clover from the Simply Spring Gem Stickers. 

Thank you for joining me on this crafting journey, and until next time, happy crafting!

Ilda 🍀

SUPPLIES

Lace Heart Layering Frames Dies Shop at: SSS | SB | HBS	Sweet Stacks Ovals Shop at: SSS | SB | HBS	Mini Messages Stamps Shop at: SSS | SB | HBS	Mini Messages Dies Shop at: SSS | SB | HBS
Gingham Happy Hearts Paper Pad Shop at: SSS | SB | HBS	Giddy for Gingham Paper Pad Shop at: SSS | SB | HBS	Simply Spring Gem Stickers Shop at: SSS | SB | HBS	Bee Creative Brilliant White Pigment Ink Shop at: SSS | SB | HBS
Stamping Pressure Tool Shop at: HBS	Bee Creative Bitty Buzz Cutter Shop at: HBS	Bee Creative Glue Shop at: SSS | SB | HBS	Honey Bee Reverse Tweezers Shop at: HBS
New Mini Misti Shop at: SSS | SB | HBS	ATELIER GODDESS GREEN Shop at: SSS | IO3	Platinum 6 Die Cutting Platform Shop at: SSS | SB | SB	Arctic White Emb.Pwd. Shop at: SSS | IO3
Heat Gun Shop at: AMZ

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Enjoyed this post? Never miss out on future posts by Following this Blog