Friday, July 22, 2016

Thinking of You Card


This past weekend we said goodbye to our Parish Priest. 
To be very honest, normally I don't get very attached to them. This one was different. In the short amount of time Father Antonio was with us, which was only 3 years he touched our lives. He was so kind and welcoming, he restored our faith in the church and brought our family back to it as he did many other young families in our community. He will greatly be missed! I hope that his replacement will continue to build on what he has started.  

So of course I had to make him a little good bye/thinking of you card!

Love how this card turned out, I think this would also make a great sympathy card and by changing the sentiment it could also be used to make a very simple wedding card or be used for any other religious celebration.


Here is the recipe for this card:

I was so excited I finally got to use my Church dies from Simon Says Stamp. Hard to see from the picture but I added some clear Wink Of Stella for some shimmer to the church and cut it out 3 times and glued them all together to make it pop up from the background. 
I also got to play with the Brushed Greetings II Stamp Set from Clearly Besotted. I used Versafine Onyx for the stamp and used Wow Clear gloss to emboss the sentiment. 
The background smooshing was created on watercolour paper using Zig Clean Color Water brushes 031,032,041. 
Then I used stitched rectangles from Simon Says to cut it out.
Mounted it onto a textured A2 card from Michael's.
To finish I used some sparkly clear Pretty Pink Posh sequins.

Hope this simple Thinking of You Card has inspired you today!

Thanks for stopping by!
Happy Crafting  :)


Wednesday, July 13, 2016

New Instagram Account!

Hey everyone!

Just a quick update...
I have created a new crafty Instagram account, here is why...

I love sharing my crafts with you all, but I feel that sharing crafts on my personal account may annoy people that really could care less about my crafts. So I tend not to share much of them on there, does that make sense? I should have listened to my husband and did that a lot sooner, but honestly I just figured it out myself.

I do not want to loose the followers that I have gained on my personal account so if you are following because you love my crafts please come follow my on the new account! If you still want to follow my ildadias account that is cool too! You just may not see the all the crafty stuff ;) I have already change the link on the side bar to get you to the new account or you can click on the link I have listed below.
Name should be easy to remember, but unfortunately long 
my new account username is ilovedoingallthingscrafty click on the link to get you there!

Hope you all understand and start following me over there! If you are a crafter your self I usually follow you back. I'm always looking for new inspirations :)

Thanks for stopping by!
Happy Crafting  :)


Tuesday, July 12, 2016

Succulent Thank You Card


I'm in love with succulents!
So when I saw this stamp set by Altenew I had to have it.
Recently I finally had the perfect excuse to make some cards using the stamps!

Love the simplicity and beauty of this card.


I used my Spectrum Noir markers to color the stamped images in.
(Sorry didn't really keep track of the ones I used, got lost in the coloring ;)
To cut out the images I used my Silhouette PixScan.
Lightly blended some Distress ink Peacock Feathers in the background.
To add some sparkle I just added some clear sequins from Pretty Pink Posh.

To finish the inside of the card I stamped one of the images in using some memento ink pear tart and added the for your hospitality sentiment in tuxedo black ink.


I really love how this Succulent Thank You Card turned out. This stamp set from Altenew is awesome and I'm sure I'll be a making more of these in the future!

Thanks for stopping by!
Happy Crafting  :)


Monday, July 4, 2016

Simple Woodsy Wedding Card | SVGCuts

If you read my last post you know that I recently attended a wedding this past weekend. Click on the link if you missed it and want to see the cute personalized wedding gift I made for the cute couple.

So for this post, I want to share with you this simple card I made using a card file from SVGCuts Five Minute Card SVG Kit. The cool thing about this card was that when I made it last week I really had no idea what the wedding theme or decor would be like this weekend... but to my surprise, it totally had a woodsy feel to it. I was really excited to see that my card was a perfect match for the evening and the couple! Funny how sometimes things happen that way ;)

#SVGCuts,Silhouette Cameo,Woodsy,ilovedoingallthingscrafty,Wedding card,Simple,

When I making this card I had imagined a tree with the couple's initials carved into it. Trees to me symbolize strength, growth, family, and forever and was why I thought it would make a cute card. The original design of the card has "love" written in the center of the heart, but of course, I always have to put my own twist on it and added the couple's initials. If you look closely you can see right through the plus sign between their initials... I thought that was pretty cool!

For this A2 card, the files were cut out using the Silhouette Cameo. I used craft cardstock and a sizzix embossing folder to create the wood impression.  I then rubbed some walnut distress ink along the edges. I added some Wink of Stella to the tiny hearts and the flower petals for a little sparkle. I finished the card by embellishing it with a wooden button and a twine bow. I left the inside blank as I wanted enough room to write a message.

Hope you guys liked my Simple Woodsy Wedding Card today.
 I wish Stefano and his beautiful Bride Breanne, the happiest of marriages. May their love grow stronger and deeper with time.

Thanks for stopping by!
Happy Crafting  :)


DIY Personalized Etched Cutting Board Tutorial + Free .studio File


Hello my Crafty Friends!

Today I want to share with you a fun wedding gift I made for a beautiful couple that got married this past weekend. I hope they love it as much as I loved enjoyed making it. This project was super simple and easy to make and I'll show you exactly how I did it!

How cool looking is this cutting board!? 
I think I might have to make one for myself now ;)


For my DIYer friends, I have numbered each picture and will explain step by step how I did it. Hopefully the steps are easy enough to follow!

  • 1. Buy yourself a glass cutting board. I found this one at the Dollar Store. Yes, the dollar store... Don't worry it's going to go from drab to FAB!
  • 2. Flip the board onto its front side. (You will be etching the smooth glass surface on the back.)
  • 3. Peal away the backing. 
  • 4. In this case the backing was vinyl and pealed off really nicely.


  • 5. Use Goo Gone or any type of adhesive remover to remove any glue residue left behind.
  • 6. Use warm soapy water and wipe the board clean.
  • 7. Use an electronic cutting Machine to cut out your design (I used the Silhouette Cameo). The script font I used is called Arabella and the type font is Bernard Mt Condensed. I also used inexpensive vinyl (the kind you line drawers with) because you will be discarding it. No need to waste the good stuff! Make sure you reverse the image as this is done on the bottom/reverse side of the glass.  I then used painters masking tape to transfer the vinyl and keep my pieces together.
  • 8. Peal off the backing from the vinyl.



  • 9. Flip over your vinyl and centre it on the cutting board. Make sure you are using the smooth glass surface (bottom of the board).
  • 10. Remove the painters tape and ensure the edges are stuck really well to the glass. You do not want any thing to seep under the edges or you may not get a crisp design.
  • 11. Use Armour Etch Cream and a paintbrush to apply the mixture to the exposed glass areas.
  • 12. Follow the instructions of the Armour Etch. I like to leave mine on a little longer than instructed to ensure a deeper etched look, about 15 minutes.


  • 13. Rinse off the cream using warm water.
  • 14. Once the cream is off peal the vinyl back. 
  • 15. Dry off your board and add clear non slip pads to each corner of the bottom of the cutting board.
  • 16. Flip it over and you are now ready to use it!


For those of you that have a Silhouette and would like the Design I used I'm giving it away for FREE!

All I ask before you download...
is to read my free files RULES!!!
  1. If you choose to download all I ask is you become a follower. (Any social media link to the right of this pg would be appreciated)
  2. Note my files are for personal use only! (Personal use means... only for you to use (no trading, or sharing of my files... let me do that!) 
  3. If you want to share, send your friends over to my blog for the download. 
  4. I'm OK with people sharing my files on their own sites as long as there is a direct link back to this blog...Please give credit where credit is due! (a message to me would also be appreciated)
Here is what the design you download will look like, play with it and add your own fonts and designs to make it your own! 


Click on the link for your FREE Spoon, Knife and Fork Cutting Board Design 
Note this file will only work with Silhouette Studio Software!

Here is one last look at this beauty! 
I'm pretty sure it won't be the last one of these I make ;)
Is it too soon to start thinking of Christmas gifts!?!


Hope you liked my Personalized Etched Cutting Board Tutorial, and if you downloaded my file and plan on using it I definitely would love to see it! Feel free to share it with me by leaving me a link to your work, emailing it to me or sharing it on my FB page!

 I find sometimes it's the smallest gifts made from the heart are the ones that mean the most!

I'll be posting the cute wedding card I made for the beautiful couple next... stay tuned :)

Thanks for stopping by!
Happy Crafting  :)


Tuesday, June 28, 2016

Personalized Bookmark Shakers for the Teachers


Yiiiippppeeee!

Today is the last day of school for my kids! I'm am so excited to have them home for the summer and the best part is that I don't have to worry about packing lunches for a while! Oh, the small things that excite me ;)

So for today I want to share with you the fun Bookmarks I made for the kids teachers.


I saw this idea a while ago on You Tube and thought these would be perfect for the teachers. Here is the link to the video for those interested. I did make them a little different then the video instructed.

Here is how I made mine.
First of all I personalized the inside clear bag with each teacher's name using black vinyl. Here is a link to the font I used. The vinyl was cut using my Silhouette Cameo. Next because I do not have a laminator, I used some self laminating sheets that I found at the Dollar Store and just cut them down to size. They worked well, but because I cut close to the edge of the inside bag I wasn't sure how they would hold up. For extra reinforcement, I used my fuse tool to secure the edges. I guess if you didn't have a fuse tool you could also stitch the edges with a sewing machine. Before finishing off the tops of the bookmarks I filled them with various sequin colors, chunky glitter and microbreads. To seal the tops I used clear scotch tape, then wrapped coordination washi tape along the top edge. I finished them by adding an eyelit in the center to add some decorative ribbon, this also secures the layers together.

These bookmarks are fairly large they measure approximately 9 inches long by 2 inches wide. But you can make them to suit whatever size you like.


Hope you like my Personalized Bookmark Shakers for the Teachers. They are so much fun and interactive, all you want to do is shake them! I think these would make great gifts for any reader in your life.

Thanks for stopping by!
Happy Crafting  :)


Linking up with: 

Wednesday, June 22, 2016

Sunshine and Rainbow Thank You Cards


Hello my Crafty Friends!

Today I want to share with you some really simple and fun Thank You cards I made. I only needed one of these cards, but sometimes I find it is easier to make multiples especially when all the same supplies are out.

I LOVE how they turned out and will definitely make some more! 


Here is a list of my supplies:

  • Stamps - Rainbow of Happiness and Coordinating Dies - My Favorite Things
  • Ink - Paintbox Pigment Inks - Colorbox
    • Peacock Feathers - Distress Ink - Tim Holtz 
    • Black Onyx - Versafine 
  • Embossing Powder - Clear Gloss - WOW!
  • Stamp Positioner - my own DIY Stamping tool
  • Dies - Stitched Rainbow - My Favorite Things
    • Puffy Clouds My Favorite Things
    • Sunny SkiesMy Favorite Things
    • Stitched Heart - Gina Marie Designs
    • hearts - Holiday Shapes - Simon Says Stamp Die
    • Stitched Rectangle - Simon Says Stamp Die
  • Sequins - Pretty Pink Posh
  • Die Cutting Machine - Big Shot - Sizzix
  • Cardstock - Neenah Solar White 80lbs


Love this sentiment. 
This stamp set is so versatile, could be used for so many reasons. 



And here is a peak at the inside of the first card.


...and here is the second card.



I just love how you can customize this stamp set to suit your needs.


Hope you enjoyed my Sunshine and Rainbow Thank You Cards today and got inspired!
I would love to hear what you think of them.

Thanks for stopping by!
Happy Crafting  :)


Linking up with: 

Gerbera Daisy Card


It's Fleurette Bloom's New Product Release Week!

Today I am featuring the Gerbera Daisy Stamp Set.
Love her flower stamps, they are so versatile and great for many occasions!


I coloured the stamped images in with my Spectrum Noir Markers and added some clear Wink of Stella to the Petals for that extra sparkle. To finished it off, I added some Pink Flower Power sequins. For fun, I also splattered some black watercolour paint on the background. 

Check out that Shine!


Hope you liked my Gerbera Daisy Card, don't forget to stop by Fleurette Bloom's Shop to check out  the rest of the Product Release! Plus, don't forget to follow Fleurette Bloom on Facebook for lots of GIVEAWAYS this week!

Thanks for stopping by!
Happy Crafting  :)

Friday, June 17, 2016

Quick and Simple Last Minute Father's Day Shirt Card


Hi All!

Thought I would share a really quick and simple Father's Day card with you today, perfect for those of you that need something last minute. Both my Father and Father in Law have to have pockets on their shirts so I though these were very fitting! 

I think these would also make great Birthday cards simply by changing the stamped sentiments.


Here are the supplies I used:

  • Stamps -(CL261) - Hero Arts (Happy Celebrations) - Craftin Desert Divas 
  • Ink Tuxedo Black - Memento
  • Stamp Positioner - my own DIY Stamping tool
  • Dies - Stitched Square - Simon Says Stamp Die
    • Stitched Rectangle - Simon Says Stamp Die
  • Die Cutting Machine - Big Shot - Sizzix
  • Cardstock - (card base & Solid cardstock) Recollections, Scrap Pattern Paper
  • Glue - Scotch Quick Dry Adhesive, Foam Tape, Tape runner
  •  Embellishments - Coordinating buttons

For those that love to watch video's, watch how easy it is to make it!
If you haven't yet, I'd love for you to subscribe too :)


Hope this as helped any of you looking for a quick and simple "guy" card to make. 
Once again, Happy Father's Day to all Daddies out there :)

Thanks for stopping by!
Happy Crafting  :)


Linking up with: 

Thursday, June 16, 2016

Dr. Who's TARDIS Telephone Box | 3D Paper Treat Box | SVGCuts

Any Dr.Who fans out there?!? 
Well if you are, I think you love this project!

Hopefully, my husband isn't paying much attention to my blog posts these days. 
Or he may just see the surprise I made him for Father's Day. 
Recognize it?

For those of you that don't, it is the TARDIS time machine and spacecraft from Dr. Who! 
Don't ask me anything else about the show though, I have no clue... in fact when I was growing up my brother would watch it and I would run away because it creeped me out. Well as is turns out my husband was also a big fan of the show, haha! 

Cool right?! 
Even for non-fans, I love how it turned out!

Gift,3D,SVG Cuts files,#SVGCuts,Father's Day,Gift Box,Tardis,Dr. Who's TARDIS Telephone Box,ilovedoingallthingscrafty,




This file is actually the London Telephone Box from a recent SVGCuts kit, Travel the World.
But with a few simple alterations, I was able to change it to the TARDIS Telephone Box.

Here is a screenshot of my alterations and panels with measurements for those interested. I did shrink the file slightly to use 8.5 x 11-inch paper as well.


I stamped the back panel with a stamp from Happy Celebrations - Craftin Desert Divas and added some fun enamel dots.


Here is a closer look.
For the telephone signs, I did a print and cut on the Silhouette Cameo.


The box is large enough that I will be putting a small gift inside for a bonus surprise.

Take a look at it all lit up.
I just added a string of battery-operated led lights to the bottom. You can also secure them to the top as Mary did with the Telephone Box.


Hope this project has inspired you to create Dr. Who's TARDIS Telephone Box for yourself or for that true fan in your life.

Happy early Father's Day to all Dads out there :)

Thanks for stopping by!
Happy Crafting  :)

Monday, May 30, 2016

Fairy Cottage featuring Lawn Fawn Fairy Friends | 3D paper Fairytale House | SVGCuts

Hello, my friends!

I am super excited to share with you all my latest SVG Cuts project. When Mary first released this kit I knew exactly how I was going to make it. I just needed the time to do it... finally I can show you what I have been up to the last few weeks! I know I have said this before, but I think this has to be one of my very favorite 3D projects! 

So here is my take on the SVG Cuts Fairy Cottage. How cute is that?!?
 I am SO in love with it... and the Lawn Fawn Fairy Friend Stamps are the perfect match for this piece!

magic,SVG Cuts files,#SVGCuts,FREE file,cancer patients,ilovedoingallthingscrafty,papercraft,Fairy Cottage,3D Paper Art,fairy tale,3D House,Lawn Fawn Fairy Friends Stamp set,hospital,decoration,

Like some of my recent larger projects, this Fairy Cottage will be displayed on one of the Hospital Units I work on. I think the sentiments and the whole fairy theme is perfect for the patients at our hospital. Even if it is just to make someone smile, I have done my job and all the work was worth it!


So let me give you a tour of this little cottage...

As you can see I used a lot of different embossing folders, this adds a lot of interest and added detail to the cottage without a lot of work. I also thought it would be fun to continue the twig railing down the steps. I think that has to be one of my favorite touches! I loved how Mary added the spinners on her cottage and I happened to have the same ones in my stash, so I thought if I added a clock face it would look cool too!


The back of the fairy cottage has a large opening for plugging in a string of lights or as I did by adding a LED battery-powered pack. I chose to use a multicolored string that I had purchased around Christmas time. The different color of lights just makes the cottage look magical!

Along the bottom of the cottage, I added floral stamps that I colored and cut out from the same Lawn Fawn Fairy Friends Stamp set. To do that, I used Tuxedo Black Memento ink and my Spectrum Noir markers then used my Silhouette PixScan to do the trace and cut them out.   


Also, to the perimeter of the cottage I used this grass file that comes from the FREE Design section, just welded the files together to create longer strips. 

I stuck to plain colored card stock, simply because I have lots of supplies and find it difficult sometimes to coordinate patterned papers with projects this size.  I like to let patterned paper inspire the project rather than the other way around. 


The only alteration I did to the original file of the house was to add some circle cutouts on the mushroom-like roof.  I think it would have looked good with the solid panels, but I guess this is how my mind thinks a fairy tail mushroom looks like ;)


To create the stain glass appearance I used my Spectrum Noir Markers and colored the velum sections of the window in various colors. I also added Wink of Stella for that extra sparkle to the window and all of the fairies' wings. 


With white pigment ink and a Studio G Alphabet set, I stamped various "fairy" like sentiments on the steps and the rock. I thought of my patients going through their cancer treatments when I was doing this part and words that would motivate them to get through it.


For fun, I thought it would look cool to make the fairies look like they were flying around their house. I used some red wire and attached them with hot glue. 

I thought the fairy holding this stamped phrase was the perfect finishing touch!


Well, thanks for stopping by! Let me know what you think of this project 
:)

I hope you all enjoyed my take of the SVG Cuts Fairy Cottage featuring Lawn Fawn Fairy Friends. Hopefully, it has inspired you to create one for yourself or for someone else!

and like the Fairies said, "have a magical day!"
Happy Crafting  :)