CAS Happy Holidays Card | Studio Katia

Well hello, again friends!

Today I have the perfect card to mass-produce for the Holidays! It was one of those cards that came together so easily and so quickly that I have to share with you my process.

CARD DETAILS

To start I die cut a piece of green and red cardstock out using the HALF STRIPED COVER. I then flipped over the die-cut green layer and glued it to the red layer. Because you will be seeing the underside of the die-cut piece, make sure your cutting plates are new or smooth, or you can use a piece of cardstock underneath to avoid the transfer of impressions onto the paper.

I then glued the panel onto the card base.

Next, I stamped out the Happy Holidays stamp from the GIFT TAG GREETINGS:WINTER onto black cardstock and then white heat embossed the letters, trimmed the piece out and then added to the center of the card front.

To finish off the card and to make it look like a present, I added the die-cut bow from the ELEGANT SCALLOP OVAL die set and glued an ICY SPARKLE CRYSTAL to the bow.

Thank you for stopping by, hope you enjoyed this quick and easy tutorial.

Until next time... Happy Crafting 👋

SUPPLIES

HALF STRIPED COVER Shop at: SSS | SK	ELEGANT SCALLOP OVAL Shop at: SSS | SK	GIFT TAG GREETINGS: WINTER Shop at: SSS | SK	ICY SPARKLE CRYSTALS Shop at: SSS | SK	STUDIO KATIA GLUE Shop at: SSS | SK
NEENAH SOLAR WHITE 110 Shop at: SSS | AMZ | HBS	MINI MISTI Shop at: SSS | AMZ | SBC | SK	Gemini Jr Die Cutting/Embossing Machine Shop at: SSS | AMZ | SBC	UNICORN White Pigment Ink Pad Shop at: SSS | AMZ	Arctic White Ultra Powder Shop at: SSS | IO3
Foam Tape 1/2 inch Shop at: AMZ	Double Ended Jewel Picker Shop at: SSS | AMZ | HBS

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Poinsettia Petal Gatefold Christmas Card | Honey Bee Stamps

Hello, my friends and welcome back to my blog!

If you love to die cut and paper piece, this is a great card for you as there was no coloring involved unless you count some ink blending. I think this design and the gatefold surprise element would wow anyone receiving it!

  CARD DETAILS

To start off this card I began by die cutting the card base and a few of the other pieces from the FLOWER PETAL CARD DIE set. I did not cut out any petals from the set as I wanted to create my own petals using the Poinsettia dies.

I then used the circle die cut piece as a guide for how large to make my poinsettia. To start the poinsettia I began by die cutting the poinsettia layers for the center of the card using the WINTER BOUQUET DIES. I used the DETAIL BLENDER BRUSH, to ink up the tips of each petal using Black Soot Distress Oxide ink. I then stacked and glued the initial layers of the flower using foam tape in between to add some dimension to the center. To add even more dimension I slightly squeezed each petal to lift the edges making it look more realistic.

To enlarge the poinsettia and cover up the circle that I had die cut previously, I die cut the largest poinsettia about 5 more times to create the petals I needed to build out the flower. I first inked up the petals and then snipped each petal off by cutting toward the center of the flower. See the image below. Each poinsettia gave me 5 large petals to use.

I then flipped the poinsettia center that I had previously glued together and began filling and gluing petals along the outer edge of the flower until I had enough to cover up the circle. This ended up being about 3 more outer layers. Once that was done I glued the poinsettia down to the circle and set it aside to work on the rest of the card.

The FLOWER PETAL CARD DIES include the shape of a flower petal flap that I had die cut using green cardstock and glued to each side. Since I wasn't using the petals that were meant to cover up the die cut piece, I just die cut winter foliage using various dies from the WINTER BOUQUET DIES and glued those pieces along the petal edge instead. To the pine cones and to the evergreen bunches I used a Quickie glue pen to add fine glue lines to the paper and then sprinkled on some glitter.

I then glued the poinsettia that I had previously made onto the right side of the card finishing off the right flap. To complete the left side, I die-cut a circle using green cardstock to cover up the edges of the foliage on the left flap and then trimmed off the excess that hung over the edge.

Next,  I stamped out a partial greeting on the left side using a stamp from the CHRISTMAS BLESSINGS stamp set. In hindsight, I wish I had stamped my sentiment first before gluing this piece in place as I had a hard time stamping it out afterward. It was just awkward to place the bulky card in the stamp positioner at this point.

Once both flaps of the card are pulled open, you finally see the Christmas Greeting on the inside of the card. The Merry Christmas stamp I used here also comes from the CHRISTMAS BLESSINGS stamp set.

When the card is closed it lays pretty flat, but because of all the layers, it likes to spring up a little. To solve that and to give it that extra element of surprise I just tied a satin ribbon around the bottom of the card creating a little belly band.

I hope you were inspired by this Poinsettia Petal Gatefold Christmas Card. I would love to see more versions of flowers made using the same FLOWER PETAL CARD DIES. For more inspiration using these products visit Honey Bee Stamps.

Thank you for stopping by 😊

Until next time... Happy Crafting 👋

SUPPLIES

WINTER BOUQUET DIES Shop at: SSS | SBC | HBS	CHRISTMAS BLESSINGS Shop at: SSS | SBC | HBS	FLOWER PETAL CARD DIES Shop at: SSS | HBS	RAW HONEY GEM STICKERS Shop at: SSS | SBC | HBS	DETAIL BLENDER BRUSHES Shop at: SSS | HBS
NEENAH SOLAR WHITE 110 Shop at: SSS | AMZ | HBS	MINI MISTI Shop at: SSS | AMZ | SBC | SK	BLACKOUT INK Shop at: SSS | IO3	Gemini Jr Die Cutting/Embossing Machine Shop at: SSS | AMZ | SBC	Oxide Ink Pad VINTAGE PHOTO Shop at: SSS | SBC | HBS
Oxide Ink Pad BLACK SOOT Shop at: SSS | SBC | HBS	Sakura Quickie Glue Pen Shop at: SSS | AMZ | SK	STUDIO KATIA GLUE Shop at: SSS | SK	SPARKLE GLITTER Shop at: SSS | SK

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!

Santa's Helpers Christmas Tags | November 2019 Large Die of the Month | Spellbinders

Happy weekend friends!

Before you know it Christmas will be here and to prepare for that, I have the cutest Christmas Tags to share with you featuring the November 2019 Large Die of the Month from Spellbinders help decorate my presents!

CARD DETAILS

How cute are these little faces?!

These "Santa’s Helpers" dies are perfect for making shaped cards, gift holders, scrapbook pages or plain old gift tags like I have done here today. You can keep them simple or go all out with decorating them like I did.

To make them, I die cut every piece out using the solid color cardstock and then pieced and glued them all together. I then spent some time embellishing them and adding the extra details to make them even cuter. For example the puffy details on Santa's Beard and hat, the blended cheeks, and white gel dots on their eyes, the eyelashes, the glossy accents on their noses, the button gems, the bows, and Christmas bells.

I glued each of them to a piece of heavy white cardstock and then cut a shadow border all around the image.

On the back of each tag, I used sentiments from THE GIFT TAG GREETINGS: WINTER stamp set. To turn these into tags I added an eyelet at the top and then added the silver stretchy cord to each of them to tie on to the gifts.

Here is what the tag looks like when tied onto a gift bag.

 These tags measure about 3 x 5.5 inches.

Plus once you're done using them as gift tags the recipient can keep them and hang them up on their Christmas tree!

I hope these adorable Santa's Helpers Christmas Tags inspired you to pretty up your presents and look at other ways to use your dies.

If you're interested in signing up for a monthly Card Making Club make sure you check out the Spellbinders website for more details!

Thank you for stopping by 😊

Until next time... Happy Crafting 👋

SUPPLIES

LARGE DIE OF THE MONTH MEMBERSHIP Shop at: SB	PLATINUM 6 DIE CUTTING PLATFORM Shop at: SB	NEENAH SOLAR WHITE 110 Shop at: SSS | AMZ | HBS	MINI MISTI Shop at: SSS | AMZ | SBC | SK
GIFT TAG GREETINGS: WINTER Shop at: SSS | SK	BLACKOUT INK Shop at: SSS | IO3	Oxide Ink Pad WORN LIPSTICK Shop at: SSS | SBC | HBS	DETAIL BLENDER BRUSHES Shop at: HBS
Liquid Applique Shop at: SSS | AMZ	Crop-A-Dile II Big Bite Punch Shop at: SSS | AMZ	METAL Eyelets Shop at: SSS | AMZ	OCEAN BREEZE GEM STICKERS Shop at: HBS
BACK TO BASICS Shop at: HBS	WHITE GEM STICKERS Shop at: HBS	STUDIO KATIA GLUE Shop at: SSS | SK	Glossy Accents Shop at: SSS | AMZ | SBC | HBS
Micron Pens Shop at: SSS

To make supplies easy for you to find, I have linked them above. If something is no longer available I will link to a similar product. Affiliate links may be used depending on the product linked. Please help support my blog by using these links while shopping at no additional cost to you. For more information about the affiliates I use, please visit my disclaimer here. Thanks so much for all your support!