Friday, October 12, 2018

Poinsettia Blessings Wreath Card |SNEAK Preview for Ink On 3's Holiday Blessings Release


Hey Everyone 👋

Today I am sharing a quick sneak preview of a no line coloring Christmas card I made for Ink On 3's next Release, Holiday Blessings featuring the new Poinsettia and Blessings stamp set.

How gorgeous is this wreath I created!?! If you love creating floral clusters, the Poinsettia wreath builder is going be for you. I am in love with it!!! Isn't it SO pretty? 😍 
  
Poinsettia Blessings Wreath CarPoinsettia Blessings Wreath Card |SNEAK Preview for Ink On 3's Holiday Blessings Release by ilovedoingallthingscrafty.comd |SNEAK Preview for Ink On 3's Holiday Blessings Release

Stay tuned Ink On 3's Social Media all week to see all the inspiration from the Design Team. You are going to love the Holiday Blessings release!

Products from this Release will be available October 17th with a Hop to follow on the 18th.

Thank you for stopping by 😊
Until next time... Happy Crafting 👋

Thursday, October 11, 2018

Super Kobi and the Monster Gang Halloween Scene Card


Are you Halloween fans? If so, make sure you are following the Studio Katia Blog for lots of Halloween inspiration from the design team this week!

Today I am sharing this fun Halloween scene card featuring Kobi the Super Bear Stamps and Dies and together with the Monster Bash Stamp and Die set.

Super Kobi and the Monster Gang Halloween Scene Card by ilovedoingallthingscrafty.com
To make this card I started by stamping out all the images, colored them in with Copic markers and then die cut them using coordinating dies. I then blended out 3 colors of distress oxide inks onto my background (Carved Pumpkin, Wilted Violet and Black Soot) and then sprayed the surface with water and picked up the droplets with a paper towel. Next I sprayed the Spider Web Stencil with water and layed it onto the background, allowing it to get absorbed by the paper. I then carefully lifted the stencil off and picked up the water from the paper using a paper towel, which left behind the behind the spiderweb impressions. I then die cut the background using the large dotted rectangle from the Dotted Patterns Set 3 Die set. Then I arranged the little monsters and glue them into place (some directly onto the background and others popped up with foam tape for dimension). Stamped the Halloween Greeting onto the sentiment banner strip from the Best Ever Die set, and glued that into place. Then I finished the card front by adding these fun Silver Polka Fusion Sequins for some sparkle as well as glossy accents.

Don't they look like little a little Street Gang?... makes me giggle!

Super Kobi and the Monster Gang Halloween Scene Card by ilovedoingallthingscrafty.com

To the inside I stamped out this fun sentiment!

Super Kobi and the Monster Gang Halloween Scene Card by ilovedoingallthingscrafty.com

Hope this uper Kobi and the Monster Gang Halloween Scene Card has inspired you today!

Thank you for stopping by 😊
Until next time... Have a BOO-tiful Day! 👋

SUPPLIES
To make supplies easy to find, I have linked them below. If something I used is no longer available I will link to a similar product.
Affiliate links may be used depending on the product. Your purchases help keep my blog running, so thanks in advance for the support!
KOBI THE SUPER BEAR STAMP SET
KOBI THE SUPER BEAR STAMP SET
Shop at:
SSS | SK
KOBI THE SUPER BEAR DIES
KOBI THE SUPER BEAR DIES
Shop at:
SSS | SK
MONSTER BASH STAMP SET
MONSTER BASH STAMP SET
Shop at:
SSS | SK
MONSTER BASH DIES
MONSTER BASH DIES
Shop at:
SSS | SK
SPIDER-WEB STENCIL
SPIDER-WEB STENCIL
Shop at:
SSS | SK
DOTTED PATTERNS SET 3 DIES
DOTTED PATTERNS SET 3 DIES
Shop at:
SSS | SK
Best Ever Dies
Best Ever Dies
Shop at:
SSS | SK
Triangle Tray
Triangle Tray
Shop at:
SSS | SK
SILVER POLKA FUSION
SILVER POLKA FUSION
Shop at:
SSS | SK
STUDIO KATIA GLUE
STUDIO KATIA GLUE
Shop at:
SSS | SK
Tim Holtz Stamp Platform
Tim Holtz Stamp Platform
Shop at:
SSS | AMZ
Strathmore 20 Sheet Smooth Bristol Pad, 9 by 12
Strathmore 20 Sheet Smooth Bristol Pad, 9 by 12"
Shop at:
SSS | AMZ
Blackout Hybrid Detail Ink
Blackout Hybrid Detail Ink
Shop at:
SSS | IO3
Oxide Ink Pad CARVED PUMPKIN
Oxide Ink Pad CARVED PUMPKIN
Shop at:
SSS
Oxide Ink Pad BLACK SOOT
Oxide Ink Pad BLACK SOOT
Shop at:
SSS
Oxide Ink Pad WILTED VIOLET
Oxide Ink Pad WILTED VIOLET
Shop at:
SSS
Tim Holtz DISTRESS SPRAYER Ranger
Tim Holtz DISTRESS SPRAYER Ranger
Shop at:
SSS
Sizzix Big Shot
Sizzix Big Shot
Shop at:
SSS | AMZ
STANDARD CUTTING PADS
STANDARD CUTTING PADS
Shop at:
SSS | AMZ
Magnetic Platform
Magnetic Platform
Shop at:
SSS | AMZ
Uni-Ball Impact Gel Pen
Uni-Ball Impact Gel Pen
Shop at:
SSS | AMZ
Double Ended Jewel Picker
Double Ended Jewel Picker
Shop at:
SSS | AMZ | HBS
Double-Sided Foam Tape
Double-Sided Foam Tape
Shop at:
SSS | AMZ
Glossy Accents
Glossy Accents
Shop at:
SSS | AMZ
Recollections Black Heavyweight Cardstock 110bs
Recollections Black Heavyweight Cardstock 110bs
Shop at:
AMZ

Tuesday, October 9, 2018

Dancing Deer Die for Simon Says Stamp Fun and Festive Release | Partial Spinner Card


Hello Friends and thanks for joining me today! 

 I can finally share the card I made for Simon Says Stamp Fun and Festive Release 😄


My card features the new Dancing Deer Die. The idea I had for this card was to make it look like the Deer, lets call him Rudolf because he has a red nose 😉 was flying over the moon across a night sky. If you know me, you'll know I love interactive cards... so for this card I made it so that the moon spun from one side to another without letting the deer spin all the way around.

Dancing Deer Die for Simon Says Stamp Fun and Festive Release | Partial Spinner Card by ilovedoingallthingscrafty.com

I have been wanting to make a tall and skinny card for the longest time so I thought this card would work perfectly. 
  • To begin, I painted my night sky using Mijello Mission Gold Watercolors using a mix of Persian Blue and Ivory Black. 
  • To the background I added white splatters using a copic white pigment. Set it aside to dry.
  • Next I did all my die cutting. A white layer of the deer, a brown one and then a lighter brown for the antlers. I then pieced the deer together and added a red crystal to the nose.
  • I then die cut the pieces for the moon, 2 large circles for the moon, and 2 smaller circles to make the spinner element. 
  • I glued the 2 large circles together, then blended some Hickory Smoke Distress Oxide Ink to the outer edge of the circle. Sprayed some water drops and picked it up with a paper towel.
  • Next, I worked on the spinner mechanism by gluing a flat button onto one of the smaller circles I had cut out. Set it aside to dry.
  • I then die cut a small circle on the upper half of the night sky background, slightly larger than the button. 
  • Next I placed the button through opening of the die cut circle and glued the other small die cut circle to the top. 
  • Once the spinner was dry and in place I added foam tape behind the background panel to pop it up and allow the spinner to move freely. Avoiding foam around the spinner area. Here is a link of a video to a previous spinner I created if you want a better idea of a similar process.
  • Before attaching the moon to the spinner, added a couple of pieces of foam tape around the mechanism to act as movement stoppers. One at the the 4 o'clock mark and another at the 9 o'clock mark. Do not remove the protective tape.
  • I then glued the deer onto the moon. Right about the middle part of the deer's body I added another piece of foam tape so that that piece would catch on the pieces that were already glued down on the panel. I then carefully placed and glued the moon onto the center of the spinning mechanism.


  • Next I die cut 3 layers of the Sending Die using white cardstock, stacked and glued them together and then added a silver glitter layer of cardstock to the top. 
  • Repeated the same thing with the Christmas Blessing Die.

Dancing Deer Die for Simon Says Stamp Fun and Festive Release | Partial Spinner Card by ilovedoingallthingscrafty.com
  • Finished off the card by adding some white gel pen details and crystals.

Dancing Deer Die for Simon Says Stamp Fun and Festive Release | Partial Spinner Card by ilovedoingallthingscrafty.com

The completed card measures 4 x 8.5 inches.

Here is a peak of the card in action.


I hope this partial spinning Christmas Blessings Deer card inspired you today.

Don't forget to check out all the new Fun and Festive Release Goodies!

Thank you for stopping by 😊
Until next time... Happy Crafting 👋

SUPPLIES
To make supplies easy to find, I have linked them below. If something I used is no longer available I will link to a similar product.
Affiliate links may be used depending on the product. Your purchases help keep my blog running, so thanks in advance for the support!
Supplies marked with an asterisk (*) were generously sent to me.
Dancing Deer Die
*Dancing Deer Die
Shop at:
SSS
SENDING Wafer Die
SENDING Wafer Die
Shop at:
SSS
Christmas Blessing Dies
Christmas Blessing Dies
Shop at:
SSS
Nested Circle Dies
Nested Circle Dies
Shop at:
SSS
Mijello Mission Gold Water Color Palette Set
Mijello Mission Gold Water Color Palette Set
Shop at:
SSS | AMZ
Oxide Ink Pad HICKORY SMOKE
Oxide Ink Pad HICKORY SMOKE
Shop at:
SSS
Copic Opaque White Pigment
Copic Opaque White Pigment
Shop at:
AMZ
April Crystals
April Crystals
Shop at:
SSS | SK
SILVER | CRYSTALS
SILVER | CRYSTALS
Shop at:
SK
Uni-Ball Impact Gel Pen
Uni-Ball Impact Gel Pen
Shop at:
SSS | AMZ

Friday, October 5, 2018

Chin Up Buttercup Bunny | No Line Coloring | Encouragement Card

Yay it's Friday!!! 

So if you are feeling down like my little Bunny Buttercup here, it's time you cheered up 😊cause it's the weekend Baby!

Chin Up Buttercup Bunny | No Line Coloring | Encouragement Card by ilovedoingallthingscrafty.com

To create this card:

  • Began by stamping out the Bunny from the Blah Humbunny set using Fadeout Ink. 
  • I stamped and cut out a mask to cover the bunny up so that I could stamp the flowers from the Chin Up Buttercup set out to build my scene. 
  • I then colored the images in using Copic markers and added detail using a coordinating prismacolor pencil. (Copics Used: Colorless Blender, RV10, Y02, Y08, Y17, YG17, B00, YG67, N0, N2, N4, N6, N8)
  • Once my scene was colored, I die cut the panel using the second largest frame from the Scallop A2 Frame dies.  
  • Next, I stamped the Chin Up on the top right hand side of the scalloped frame using Blackout Ink, and also stamped out Buttercup onto a another piece of paper so that I could die cut it out using the coordinating Buttercup die.
  • I also stamped out the little buzzing bee friend from the Bee Hive set, no line colored it and die cut it using the coordinating Bee Hive Dies.
  • Now that all the pieces were cut and colored I assembled the card, popping up the little bee and the Buttercup sentiment with foam tape and then attaching the scalloped panel to a bright yellow piece of cardstock cut to 4.25 by 5.5 inches, which was then mounted onto an A2 size card base.
  • I then added some Summer Sun confetti around the Buttercup greeting in the front panel and added some white detailing with a gel pen.

Chin Up Buttercup Bunny | No Line Coloring | Encouragement Card by ilovedoingallthingscrafty.com 
  • To the inside of the card I used a couple of stamps from the With Sympathy stamp set to stamp out the encouragement greeting. 

Chin Up Buttercup Bunny | No Line Coloring | Encouragement Card by ilovedoingallthingscrafty.com


Hope you think of this Chin Up Buttercup Bunny card the next time you need an idea to brighten someone's day! For more inspiration using Honey Bee goodies check out the HB Blog!

Thank you for stopping by 😊
Until next time... Happy Crafting 👋

SUPPLIES
To make supplies easy to find, I have linked them below. If something I used is no longer available I will link to a similar product.
Affiliate links may be used depending on the product. Your purchases help keep my blog running, so thanks in advance for the support!

Chin Up Buttercup
Chin Up Buttercup
Shop at:
SSS | HBS
Chin Up Buttercup Dies
Chin Up Buttercup Dies
Shop at:
SSS | HBS
Blah Humbunny
Blah Humbunny
Shop at:
SSS | HBS
Bee Hive
Bee Hive
Shop at:
SSS | HBS
Bee Hive Dies
Bee Hive Dies
Shop at:
SSS | HBS
With Sympathy
With Sympathy
Shop at:
SSS | HBS
Scallop A2 Frames Dies
Scallop A2 Frames Dies
Shop at:
HBS | SSS
Summer Sun Confetti Mix
Summer Sun Confetti Mix
Shop at:
HBS
Neenah  80 LB SOLAR WHITE
Neenah 80 LB SOLAR WHITE
Shop at:
SSS | AMZ
Tim Holtz Stamp Platform
Tim Holtz Stamp Platform
Shop at:
SSS | AMZ
Fadeout No Line Ink
Fadeout No Line Ink
Shop at:
SSS | IO3
Blackout Hybrid Detail Ink
Blackout Hybrid Detail Ink
Shop at:
SSS | IO3
Prismacolor Colored Pencils 48 Pack
Prismacolor Colored Pencils 48 Pack
Shop at:
SSS | AMZ
Sizzix Big Shot
Sizzix Big Shot
Shop at:
SSS | AMZ
STANDARD CUTTING PADS
STANDARD CUTTING PADS
Shop at:
SSS | AMZ
Magnetic Platform
Magnetic Platform
Shop at:
SSS | AMZ
Uni-Ball Impact Gel Pen
Uni-Ball Impact Gel Pen
Shop at:
SSS | AMZ
MULTI MEDIUM MATTE Glue
MULTI MEDIUM MATTE Glue
Shop at:
SSS | AMZ
Double Ended Jewel Picker
Double Ended Jewel Picker
Shop at:
SSS | AMZ | HBS
Double-Sided Foam Tape
Double-Sided Foam Tape
Shop at:
SSS | AMZ

For My Canadian Friends