Saturday, February 11, 2012

Cake Pop Gift Box - FREE DOWNLOAD

Hello and welcome to my blog! This is my first official post!!! Today I am sharing with you a cake box that I've created in SCAL2. I decided to enter it in the SVG Cuts Valentine challenge. I had such great feedback from SVG Cuts Facebook followers, and many requests to share the file. So I thought the easiest way would be to create a blog. I have been putting that off for so long but I finally caved! Not sure how often I will be posting...  life is so crazy busy right now! 

Anyways back to the post... here is my Cake Pop Gift Box! It is tall enough for a 6-inch stick, you can also use a 4-inch stick but the cake pop will sit on the paper. Hope you love it as much as I do! The Rose comes from SVG Cuts Crush on you kit , the chocolate truffle and borders come from their Free Designs on their Blog.

Cake Pop Gift Box - FREE DOWNLOAD by ilovedoingallthingscrafty.com

Click on the link below to get your own box. Please remember I am not a graphic designer, nor do I claim to be one. This file was done in SCAL2 and cut with the Cricut Expression machine (yes I know!) So I'm pretty sure it will work with the SCAL programs. Not so sure it will work with other software! But let me know if it does or if you know how to make it work. Thanks for understanding. Enjoy!

Ilda :)

My free files RULES!!!

  1. If you choose to download all I ask is you become a follower.
  2. Note my files are for personal use only! (Personal use means... only for you to use (no trading, or sharing of my files... let me do that!) 
  3. If you want to share, send your friends over to my blog for the download. 
  4. I'm OK with people sharing my files on their own sites as long as there is a direct link back to this blog...Give credit where credit is due! (a message to me would also be appreciated)
Cake Pop Gift Box

If you would like to donate, (click the đŸ‘‰DONATE button on the sidebar) I will happily accept any amount you see fit. No pressure at all either :) It will just make my day that someone wants to support my passion.

18 comments:

  1. Such a cute box and wonderful idea. Thanks for the file. http://craftygirl21.blogspot.com/

    ReplyDelete
  2. thank you so very much for sharing your file I am looking forward to trying it out

    ReplyDelete
  3. Wow, this is soooooo adorable! Fantastic file. TFS

    ReplyDelete
  4. Thanks Ilda! This box is too cute! And I was able to open it in SCAL 3. =) I'm also following your blog now.

    ReplyDelete
  5. I just love this, Ilda! It's just adorable. Thank you so much for the pattern. Can't wait to try it.

    ReplyDelete
  6. That is exquisite. Thank you for sharing the file. Your work is beautiful! ~Kim

    ReplyDelete
  7. What a lovely box!Thank you so much for sharing!

    ReplyDelete
  8. I am soo lost how do i open file and what programs do i need

    ReplyDelete
  9. Hi... you will need the Sure Cuts A Lot program, for electronic cutters. There you can open the file and cut away! Its available through craftedge.com Hope that helps!

    ReplyDelete
  10. Thank you so much for the adorable box! I cut out the box in scal, but I was wondering how you make the insert for the cake pop?

    ReplyDelete
    Replies
    1. Hi! All the pieces should be there. When you open up the file in SCAL you will see 3 tabs at the top of the page. One will say box, the next tab should say stick stabilizer and the last tab is the liner. You must click on each tab to open up that page. Hope that helps! :)

      Delete

Thanks so much for taking the time and leaving me a comment! I always love hearing from you and I appreciate you stopping by! Hugs, Ilda